Tech & GadgetsHow-to
Power Bank mAh Explained: Wh, Real Capacity and Phone Charges
Power bank mAh explained: how to convert mAh to Wh, why you lose capacity, how many phone charges to expect, and the 100 Wh airline limit in plain English.
By PlusReviews Editorial TeamPublished 8 min read10 sources
Disclosure: PlusReviews is reader-supported. When you buy through links on this page we may earn an affiliate commission, at no extra cost to you. Our picks are based on independent research. How we make money.
A power bank’s mAh rating tells you how much charge its cells hold, but not how much reaches your phone. To compare banks properly, convert to watt-hours (Wh): multiply the mAh by the cell voltage, usually 3.6 to 3.9 volts, and divide by 1,000. A 10,000 mAh bank stores about 36 to 39 Wh, and after conversion losses it will charge a typical 2026 phone roughly one to two times.
Wh is also the number airlines care about. The FAA lets you carry power banks of up to 100 Wh without approval, which works out to roughly 26,000 to 27,800 mAh. This guide explains the math, where the missing capacity goes, and how many charges to expect from common sizes. If you are shopping, our guide to the best portable chargers for travel applies all of this to specific models, all under the airline limit.
Everything here is based on manufacturer specifications, published reviews and FAA and TSA guidance as of November 2026. The charge estimates are our own calculations, not lab tests.
What mAh actually measures
A milliamp-hour (mAh) is a unit of electric charge: 1,000 mAh is one amp of current flowing for one hour. On its own, it says nothing about energy, because energy also depends on voltage. A 5,000 mAh battery at 7.8 volts holds twice the energy of a 5,000 mAh battery at 3.9 volts.
Power bank makers quote mAh at the voltage of the lithium-ion cells inside, which is typically between 3.6 and 3.9 volts. Phone makers do the same. That is why the mAh numbers on a bank and a phone look directly comparable, but they are not, because USB charging does not happen at cell voltage.
Nitecore’s spec sheet for its NB10000 Gen 4 shows this neatly. The bank contains 5,000 mAh at 7.8 volts, which Nitecore lists as equivalent to 10,000 mAh at 3.9 volts. Both describe the same 39 Wh of energy.
How to convert mAh to Wh
The formula is simple, and it is the same one the FAA gives travelers:
Wh = mAh × volts ÷ 1,000
| Power bank | Rated capacity | Cell voltage | Energy |
|---|---|---|---|
| Typical 10,000 mAh bank | 10,000 mAh | 3.6 to 3.7 V | 36 to 37 Wh |
| Nitecore NB10000 Gen 4 | 10,000 mAh | 3.9 V | 39 Wh |
| UGREEN Nexode 20000mAh 130W | 20,000 mAh | 3.6 V | 72 Wh |
| Anker Prime (26K, 300W) | 26,250 mAh | 3.8 V | 99.75 Wh |
If the voltage is not printed, use 3.7 volts for a rough estimate. Most reputable banks print the Wh rating on the label, and some airlines expect to see it. Emirates, for example, says capacity information must be available on any power bank it accepts.
Why you never get the full mAh
Your phone charges over USB at 5 volts or higher, not at 3.7 volts. The bank’s circuitry steps the voltage up, and that conversion loses energy as heat. The phone then loses a little more converting the incoming power back down to charge its own battery. Cables, wireless charging and heat add further losses.
Two manufacturers publish real output figures, which makes the size of the gap clear:
- Anker Prime (26K, 300W): Anker says that after conversion, about 15,200 mAh of its 26,250 mAh reaches your devices. Anker does not state the voltage for that figure. If it is measured at USB’s 5 volts, as Nitecore’s figures are, it works out to about 76 Wh of the bank’s 99.75 Wh, or roughly 76% efficiency.
- Nitecore NB10000 Gen 4: Nitecore rates it at 6,800 mAh at 5 volts with a 3-amp load and 7,200 mAh at a 1-amp load. That is 34 to 36 Wh of 39 Wh, or about 87 to 92%.
Reviewers see similar numbers. Mighty Gadget measured more than 80% efficiency from UGREEN’s 20,000 mAh Nexode bank and called that typical for a decent power bank. For a 10,000 mAh MagGo bank, The Gadgeteer reported that Anker’s support documentation estimates 5,500 to 6,500 mAh of usable capacity.
The confusing part is that a delivered-capacity figure quoted at 5 volts makes a bank look worse than it is. Anker’s 15,200 of 26,250 mAh looks like 58%, but if that figure is at 5 volts, the energy efficiency is about 76%. The mAh number shrinks partly because the voltage rises from about 3.8 to 5 volts, not only because energy is lost. Comparing in Wh avoids that trap.
How many phone charges to expect
To estimate charges, work in Wh: take the bank’s Wh, multiply by about 0.7 to allow for losses at both ends, then divide by your phone battery’s Wh.
Phone makers usually publish mAh, not Wh. Google lists the Pixel 10 at a typical 4,970 mAh, for example. Assuming a cell voltage of about 3.85 volts, a 5,000 mAh phone battery holds roughly 19 Wh, and a 3,500 mAh battery about 13.5 Wh. These voltages are our assumption, so treat the results below as planning estimates.
| Power bank | Energy | Delivered (about 70%) | 5,000 mAh phone (about 19 Wh) | 3,500 mAh phone (about 13.5 Wh) |
|---|---|---|---|---|
| 5,000 mAh | About 18.5 Wh | About 13 Wh | About 0.7 charge | About 1 charge |
| 10,000 mAh | About 37 Wh | About 26 Wh | About 1.4 charges | About 1.9 charges |
| 20,000 mAh | About 72 Wh | About 50 Wh | About 2.6 charges | About 3.7 charges |
| 26,250 mAh | 99.75 Wh | About 70 Wh | About 3.7 charges | About 5.2 charges |
Real results vary. Charging a phone while using it, charging in a hot car or on a beach, using wireless charging, or running the bank at its highest output all reduce the count. Charging slowly from a cool bank tends to get you closer to the top of the range.
What about laptops and earbuds?
The same math works for any device. Apple rates the 13-inch MacBook Air battery at 53.8 Wh and the 15-inch at 66.5 Wh. A 72 Wh bank delivering roughly 50 to 58 Wh can refill a 13-inch Air about once, or the 15-inch most of the way. You will also need a bank with enough USB-C output, around 45W or more, to charge a laptop at a useful speed.
Earbuds are the opposite: their batteries are tiny, so even a 5,000 mAh bank will refill a charging case many times. Our guide to the best wireless earbuds lists rated battery life for each pair, which helps you decide whether you need a bank for them at all.
Airline Wh limits in mAh terms
Airlines and regulators use Wh because it is the honest measure of how much energy, and therefore fire risk, a battery holds. The TSA requires power banks in carry-on bags only. The FAA’s limits for spare lithium-ion batteries are:
| Energy rating | Approximate mAh (3.6 to 3.85 V) | What the FAA allows |
|---|---|---|
| Up to 100 Wh | Up to about 26,000 to 27,800 mAh | Allowed in carry-on without airline approval |
| 101 to 160 Wh | About 26,000 to 44,400 mAh | Up to two spares, with airline approval |
| Over 160 Wh | Above about 41,500 to 44,400 mAh | Forbidden on passenger aircraft |
The mAh column is our conversion; the Wh rating on the label is what counts. On top of these limits, ICAO capped passengers at two power banks from March 27, 2026, and barred recharging them in flight, and some airlines are stricter still. Southwest allows one power bank per passenger, and several international airlines ban using power banks on board entirely. Our travel charger guide has the full rule table and a 72 Wh pick that stays well clear of the line.
Watch for banks marketed as “26,800 mAh” or “30,000 mAh”. Depending on cell voltage, those can land either just under or just over 100 Wh, and a bank without a clear Wh label can be refused at the gate.
A worked example before you buy
Say a listing advertises a 20,000 mAh bank and you want to know whether it will cover a three-day trip with a phone that has a 5,000 mAh battery.
- Find the energy. The label says 72 Wh. If it showed only mAh, 20,000 × 3.6 ÷ 1,000 gives the same 72 Wh.
- Allow for losses. 72 Wh × 0.7 is about 50 Wh that you can count on reaching the phone.
- Size the phone battery. 5,000 mAh × 3.85 V ÷ 1,000 is about 19 Wh.
- Divide. 50 ÷ 19 is about 2.6 full charges, so the bank covers roughly two and a half extra days if you drain the phone daily.
- Check the airline limit. 72 Wh is under 100 Wh, so it can fly in your carry-on without approval.
If the same listing claimed 30,000 mAh, step 1 would give about 108 to 116 Wh, over the 100 Wh line. That bank would need airline approval, and you should expect questions at security.
How to choose the right capacity
- 5,000 mAh (about 18 to 19 Wh): a top-up for one day. Small enough for a pocket, and many are magnetic.
- 10,000 mAh (about 36 to 39 Wh): the everyday sweet spot. One to two phone charges at around 140 to 250 g, depending on the model.
- 20,000 mAh (about 72 to 74 Wh): for travel, several devices or a laptop top-up. UGREEN’s 20,000 mAh Nexode, for example, weighs about 480 g.
- 25,000 to 26,000 mAh (about 90 to 100 Wh): for laptop-heavy travel. Check that the label shows under 100 Wh.
Capacity is only one spec. Also check output wattage per USB-C port, total output when charging two devices, recharge speed, and weight. A heavy bank you leave at the hotel is worth less than a small one you actually carry.
Finally, check any bank you already own for recalls. Several popular power banks have been recalled in the past two years over fire risks, and recalls usually cover specific model and serial numbers printed on the bank. Our travel charger guide lists the recent ones and how to check them, and if you also need to stay safe on public Wi-Fi while traveling, see our guide to the best VPN for travel.
How we researched
We did not test power banks for this guide. Our sources were manufacturer specifications from Anker, Nitecore, Google and Apple, Mighty Gadget’s efficiency measurements and The Gadgeteer’s reporting on Anker’s usable-capacity figures, and FAA, TSA and ICAO rules as reported by CAPA. Where we calculated Wh or charge counts ourselves, we say so and show the assumptions. Read more about our process in our editorial policy.
The bottom line
Ignore the big mAh number and look for the Wh rating. Multiply mAh by about 3.7 and divide by 1,000 if Wh is missing, then plan on roughly 70% of that energy reaching your devices. A 10,000 mAh bank means one to two phone charges, a 20,000 mAh bank adds a laptop top-up, and anything up to 100 Wh can fly in your carry-on without special approval.
Frequently asked questions
How many phone charges is 10,000 mAh?
Usually about one to two full charges of a current phone. A 10,000 mAh bank stores about 36 to 39 Wh, and after conversion and charging losses roughly 25 to 27 Wh reaches the phone. A phone with a 5,000 mAh battery holds about 19 Wh, so expect around 1.4 charges; smaller phones get closer to two. These are our estimates, not lab results.
How do I convert mAh to Wh?
Multiply the mAh by the battery voltage and divide by 1,000. A 20,000 mAh bank with 3.6-volt cells stores 20,000 × 3.6 ÷ 1,000 = 72 Wh. The FAA describes the same method: volts multiplied by amp-hours.
Why doesn't my power bank deliver its full mAh rating?
The rating describes the cells inside, at about 3.6 to 3.9 volts. USB charging runs at 5 volts or more, so the bank has to step the voltage up, and some energy is lost as heat. Your phone loses a little more while charging its own battery. Based on manufacturer figures and reviews, good banks deliver roughly 75 to 90% of their stored energy.
What is the largest power bank I can take on a plane?
Up to 100 Wh without airline approval, which is roughly 26,000 to 27,800 mAh depending on cell voltage. The FAA allows up to two spare batteries of 101 to 160 Wh with the airline's approval, and nothing larger. Power banks must always go in carry-on bags.
Is a higher mAh power bank always better?
No. More mAh means more weight, longer recharge times and, above about 26,000 mAh, a risk of exceeding the 100 Wh airline limit. Output wattage, the number of USB-C ports and how quickly the bank recharges matter as much as capacity for most people.
Sources
The specifications, test results and documentation this guide draws on:
- Airline Passengers and Batteries (FAA PackSafe) — 100 Wh and 160 Wh limits; Wh = volts × amp-hours
- Power banks (TSA What Can I Bring?) — carry-on only, prohibited in checked bags
- ICAO adopts new restrictions on lithium battery power banks (CAPA) — March 27, 2026; two power banks per passenger, no charging during flights
- Anker Prime Power Bank (26K, 300W) (Anker) — 26,250 mAh / 99.75 Wh; about 15,200 mAh reaches devices after conversion losses
- NB10000 Gen4 specifications (Nitecore) — 10,000 mAh at 3.9V (39 Wh); rated 6,800 mAh at 5V (3A) and 7,200 mAh at 5V (1A)
- Ugreen Nexode Power Bank PB721 review (Mighty Gadget) — updated March 21, 2026; 20,000 mAh rated at 72 Wh; efficiency over 80%
- Anker MagGo 2 Pro review (The Gadgeteer) — September 18, 2026; Anker support documentation estimates 5,500 to 6,500 mAh usable from 10,000 mAh
- Pixel 10 tech specs (Google Store) — typical battery capacity 4,970 mAh, minimum 4,835 mAh
- Emirates announces major change for passengers on all flights (Gulf News) — capacity rating information must be available on power banks; one bank under 100 Wh; no use on board
- MacBook Air technical specifications (Apple) — 13-inch 53.8 Wh and 15-inch 66.5 Wh batteries